TM 10-1670-287-23&P 0050 00 0050 00-7 LEGEND AMT HRS INSPECTION DATA REPAIR DATA D DARN .8 X TYPE PARACHUTE CANOPY REPAIR RS RESEW .8 X MC-4 NAME    DATE BR BURN .4 X SERIAL # RE RESTENCIL .4 X LINE REPAIR PIS NAME    DATE SP SEWN PATCH .8 X WOD RLS REPLACE LINE SINGLE .8 X RCL REPLACE CONTROL LINES 1.0 X DATE INSPECTED FINAL INSPECTION SLS SEW LINE SET 1.5 X NAME    DATE RRH REPLACE RIB HALF 3.0 X INSPECTED BY RPS REPLACE PANEL SINGLE 4.0 X REPAIR HRS LS REPLACE LINE SET 3.5 X RPD REPLACE PANEL DOUBLE 7.0 X INSPECTION HRS RRC REPLACE RIB COMPLETE 5.0 X 3.00 RPM REPLACE PANEL MULTI X TOTAL HRS 5.    Making a basic patch.  A basic patch is used to repair damaged cloth when the finished patch is no closer than 1-inch from a stitched seam or stitched tape.  Should a damaged area be closer than 1- inch to the cited areas, a miscellaneous patch will be made as detailed in step 6 detailed on the following page.  The basic patch is applied by sewing.  The patch is applied to the inside of the canopy.  The deployment bag is patched on the outside.  The basic patch is shown below.  Apply a basic patch as follows: ½-IN. ¹/₁₆-IN. ½-IN. ¹/₁₆-IN. ¾-IN. SECTION A-A Preferred Rounded Corners INSIDE VIEW OUTSIDE VIEW