TM 10-1670-292-23&P 0030 00
0030 00-3
e. Turn the loop inside-out and slide into position on the appropriate strap.
2. Horizontal back-strap. Replace as follows:
a. Remove the damaged strap from the harness assembly.
b. Cut an 84-inch length of type XIII nylon webbing; sear the ends.
c. Slip an elastic retainer webbing over each end of the strap.
d. Pass one end of the webbing through one strap adjuster, through the back-strap loops, and
through the other strap adjuster.
e. Roll each webbing end to form five plies. Use a heavy-duty sewing machine, size 6 nylon thread
and 5 to 8 stitches per inch, to sew a box formation on the rolled webbing.
5¼”
