TM 10-1670-293-23&P
0017 00
UNIT MAINTENANCE
T-10C/T-10D TROOP BACK PARACHUTE ASSEMBLY
GORE SECTIONS
0017 00-1/(2 Blank)
THIS TASK COVERS:
Repair
INITIAL SETUP:
Tools
Knife (Item 13, WP 0039 00)
Needle, Basting (Item 18, WP 0039 00)
Sewing Machine, Light-Duty (Table 1, WP 0012 00)
Sewing Machine, Medium -Duty (Table 1, WP 0012 00)
Shears (Item 28, WP 0039 00)
Materials/Parts
Brush, Stenciling (Item 4, WP 0053 00)
Cloth, Parachute Mending (Item 10, WP 0053 00)
Cloth, Parachute, Nylon, 1.1-oz. (Item 11, WP 0053 00)
Thread, Cotton (Item 43, WP 0053 00)
Thread, Nylon, Size E (Item 47/44, WP 0053 00)
Stencil Board, Oiled (Item 32, WP 0053 00)
Personnel Required
92R(10) Parachute Rigger
Equipment Condition
Parachute canopy laid out on table.
References
Group No. 01, MAC (WP 0042 00)
WP 0012 00 and WP 0014 00
REPAIR
Repair gore sections by restitching, darning, patching, or restencilling, in accordance with WP 0012 00 and
WP 0014 00. Darn holes that do not exceed ½-inch in length or diameter. Darning is limited to two holes
per gore section. Stitching and darning will be done as specified in Table 2, WP 0012 00.
END OF WORK PACKAGE
