TM 10-1670-299-20&P
TO 14D1-2-470-2
NAVAIR 13-1-41
(AT4 Pack) Pocket Assembly Lowering - Continued
PROCEDURE
MATERIALS
NOTE
2.
DOUBLE FOLD TOP EDGE OF
THREAD, NYLON, SIZE FF
TOLERANCE IS 1/8
POCKET 1/2". STITCH WITH
INCH.
SIZE FF THREAD, 5 TO 8
THREAD, NYLON, SIZE 3
STITCHES PER INCH AND
TYPE MD SEWING MACHINE.
TAPE, FASTENER, PILE 2"
WIDE
3.
ALIGN CORNERS (1) AND (2)
AND SEW SIDES 1/2" FROM
TAPE, FASTENER, HOOK 2"
EDGE. SEW CORNERS (3) AND
WIDE
(4) IN SAME MANNER. OVER-
EDGE THE RAW SIDE EDGES.
4.
REPLACE HOOK AND PILE TAPE
AS SHOWN IN VIEW B. SEW AS
IN 2. ABOVE.
5.
CUT AN 11" LENGTH OF NYLON
WEBBING AND SEAR ENDS.
6.
TURN UNDER RAW EDGE OF
POCKET 1/2" AND POSITION
ON WEBBING BACK 1" FROM
EDGE LOCATING TOP AND
BOTTOM HOOK AND PILE RE-
TAINERS 1 AND 4 " FROM THE
TOP OF POCKET. STICH POCKET
SIDES AND BOTTOM TO RE-
INFORCEMENT WEBBING 3/16"
FROM EDGE. SEW AS IN 2.
ABOVE .
7.
PLACE POCKET ON PACK AND
STITCH TO PACK 1/8" FROM
POCKET EDGE WITH SIZE 3
THREAD, 5 TO 8 STITCHES
PER INCH AND TYPE HD
SEWING MACHINE.
E-12
