2-6.
Operating Procedures - Continued
d.
Air-to-Air Control of System - Continued
Channel, AGU number, and Frequency Hopping mode that will be
actually used for the operation. The operational test should include
checks of all Manual flight modes.
(b) Preflight Preparation.
1
Carefully route the wires of the external control switch
assembly through the sleeves of your jumpsuit, leaving
only a few inches of the cable protruding from the cuffs of
the jumpsuit. Excess cable should be stored inside the
suit.
2
Don your parachute and route the 90 degree connector to
the inside of the main lift web. After correctly routing
bailout
oxygen
system
components
and
attaching
weapons carrying devices and other equipment to the
parachute, attach the T/C in its container to the main
equipment carrying rings.
2-56
