TM 10-1670-305-23&P
0029 00-3
REPAIR PARTS AND SPECIAL TOOL LIST (RPSTL)
0029 00
GENERAL
AO-Assembled by
unit/AVUM level
AF-Assembled by
DS/AVIM level
AH-Assembled by
GS level
AL-Assembled by
SRA
AD-Assembled by
depot
Items with these codes are not to be requested
/requisitioned individually. The parts that make up the
assembled item must be requisitioned or fabricated
and assembled at the level of maintenance indicated
by the source code. If the 3rd position of the SMR
code authorizes you to replace the item, but the
source code indicated the item is assembled at a
higher level, order the item from the higher level of
maintenance..
XA
Do not requisition an “XA” coded item. Order the next
higher assembly. (Refer to NOTE below).
XB
If an item is not available from salvage, order it using
the CAGEC and P/N.
XC
Installation drawings, diagrams, instruction sheets,
field service drawings; identified by manufacture’s
P/N.
XD
Item is not stocked. Order an XD-coded item through
normal supply channels using the CAGEC and P/N
given, if no NSN is available
NOTE
Cannibalization or controlled exchange, when authorized, may be used as a
source of supply for items with the above source codes except for those items
source coded “XA” or those aircraft support items restricted by requirements of
AR750-1.
Maintenance Code. Maintenance codes tell you the level(s) of maintenance authorized to use
and repair support items. The maintenance codes are entered in the third and fourth positions of
the SMR code as follows:
Third Position. The maintenance code entered in the third position tells you the lowest
maintenance level authorized to remove, replace, and use an item. The maintenance code
entered in the third position will indicate authorization to the following levels of maintenance:
