ARMY TM 10-1670-281-23&P
AIR FORCE T.O. 13C5-32-2
NAW NAVAIR 13-1-32
(16) Completing the log record. Remove the hg record (DA Form 10-42 inspection data pocket log
record pocket), on the canopy riser, and record the pack data on the "Jump, Inspection and
Repack Data" page as follows:
(a) Date. Enter the day, month and year of each packing action.
(b) Bag number. Indicate non-breakaway deployment bag attachment.
(c) Routine inspection. No entry required.
(d) Jumps or dropped. No entry required.
(e) Repack. For initial packing, enter "IN"; thereafter, enter a check mark in the column each time the
parachute is repacked.
(f) Packer's name. The packers performing the pacing will sign this entry.
(g) Inspector's name. The inspector performing the pack-in-process inspector will sign this entry.
(h) Unit. Enter the unit designation to which the packers and/or the inspector are assigned.
h. Packing the 68 inch Diameter Pilot Parachute. The 68 inch diameter pilot parachute may be used with
the G-12E cargo parachute when it is used in air delivery operations which require the parachute to be
deployed by static line. The pilot parachute will be packed in a breakaway or non-breakaway
configuration, as required. Pack the pilot parachute on a packing table as follows:
(1) Attaching the breakaway static line.
(a) Partially invert the pilot parachute deployment bag by folding the sides back to expose the inner
(b) Pass the small loop of the bridle line through the deployment bag inner loop. Further pass the large
loop on the opposite end of the bridle line through the small loop to form a slip loop around the inner
loop. Draw the slip loop tight.
(c) Pass the bridle line large loop through the pilot parachute breakcord attaching loop. Further pass the
pilot parachute deployment bag and static line through the large loop to form a slip loop around the
pilot parachute breakcord attaching loop.
(2) Attaching the non-breakaway static line.
(a) Perform procedures outlined in (1)(a), above, and position the inner loop immediately above the pilot
parachute breakcord attaching loop.
(b) Using a single length of ticket no.5 cotton thread, pass one end of the thread through the pilot
parachute breakcord attaching loop until the thread center is reached.