Operating Procedures - Continued
Air-to-Air Control of System - Continued
Transmitter/Controller Setup and Programming For Air Control.
Never turn the T/C on without the antenna connected. Never
operate the T/C in any proximity closer than 25 meters to
another T/C. Damage to one or both T/Cs may result.
(a) Operational Checks.
The individual T/C that is to he used for the operation should
be used for the function/operational test performed on the
AGIJ, using the External control switch assemblies, if possible.
At a minimum, the T/C should he tested using the external
control switch assemblies, to insure that they are functional,
using an operating AGU to observe the function of the T/C. It
would also be a good practice, to make the function/operational
test on the same