REPLACE - continued
2. Carefully remove the stitching (box stitch pattern) on the wrap that secures the tuck tab assemblies
and snap fasteners (figure 2, item 1) to the right and left upper main lift web assemblies (figure 2,
item 2), remove both right and left upper main lift web assemblies from the saddle assembly
adjustment buckle (figure 2, item 3).
Figure 2. Replacing the Saddle Assembly (continued).
3. Attach new saddle assembly by laying out the upper harness assembly (figure 3, item 1) ensuring
that the diagonal backstraps (figure 3, item 2) are crossed and routed through the diagonal
backstrap guide (figure 3, item 3). In this layout configuration the shoulder pads on the left and right
upper main lift webs (figure 3, item 4), will be positioned so that the canopy release assemblies are
Figure 3. Replacing the Saddle Assembly (continued).