TM 10-1670-269-23&P
0040 00
0040 00-2
8. Pull a suitable length of the suspension line up through the V-tab on the outside of the lower lateral
band and lay the pulled length to one side.
Illustration, Outside View
9. Secure the V-tab to the lower lateral band by stitching a single row of stitching along the edges of
material making V-shaped design. Stitches are 1/8-inch along the edges of the V-tab ends. Ensure
that the pulled suspension line length is held to one side during the stitching process. Also ensure
the stitching does not extend above the upper edge or below the lower edge of the lateral band.
Stitch with size E nylon thread and 7 to 11 stitches per inch.
Illustration, Inside View
10. Beginning at a point ¼-inch below the V-tab bias cut end, further secure the V-tab to the lower lateral
band by stitching a single row of double-throw zig-zag stitching. Stitch with size E nylon thread and 7
to 11 stitches per inch.
Illustration, Outside View
