TM 10-1670-272-23&P 0032 00
0032 00-11
b. Cut a 12-inch length of 1¼-inch, type III, nylon tape; sear the ends.
c. Measure and mark 4-inches from each end. Fold the tape between the two marks to the center of
the webbing and sew in place. Use a light-duty sewing machine, size E nylon thread, and 7 to 11
stitches per inch.
d. Fold tape in the center and dip in a mixture of 50% beeswax and 50% paraffin wax for a distance
of 1¾-inches.
e. Fold the tape in the center. Place on top of the original stitch formation of the opening loop. Sew
in place using a light-duty sewing machine, size E nylon thread, 7 to 11 stitches per inch, and a
4-inch, 4-point WW stitch formation.
5. Inside retainer band keeper. Replace as follows:
a. Cut the stitching and remove the damaged keeper from the side flap panel.
Waxed
Area
3 ½ IN.
¼ IN.
¼ IN.
Details For Forming And Waxing Loop
Details For Stitching Loop To Pack Tray
