TM 10-1670-272-23&P 0003 00
0003 00-5
7. Remove the lacing end from the tacking needle and make a finished 10-inch-long log record attaching
loop by securing the two lacing ends together with an overhand knot.
Log Record Attachment Tie Completed
8. Insert the log record into the pocket and secure the record within the pocket using the pocket flap
and applicable type flap fastener.
Accomplishing a Log Record. Upon completion of the first technical/rigger-type inspection, the
individual performing the inspection will initially prepare a log record for an individual parachute or
applicable type parachute harness and accomplish subsequent record entries using the following
procedures:
NOTE
Log record book entries will be made with a suitable blue or black
marking ink pen that cannot be erased. Do not use felt tip markers
(smearing may occur).
1. Inside front cover. Using the information provided on the parachute canopy data block, make the
following entries on the inside front cover of the log record. Entries may be continued on the inside
of the back cover, if necessary.
HALF HITCH
