TM 10-1670-272-23&P 0004 00
0004 00-2
c. Secure the pull-dot snap fasteners.
d. Secure both pack tray horizontal back-strap-retainers over the horizontal back-strap, as illustrated
above.
2. Risers. Attach the risers to the MC1-1B/MC1-1E harness as follows:
a. Lay the parachute harness down, with the female fittings of the harness near the male fittings of
the risers.
b. Fit heel of male fitting into groove of female fitting.
c. Fit toe of male fitting into slot of female fitting, close latch and insure that the latch is securely
locked.
TOE
MALE FITTING
HEEL
LATCH
CABLE LOOP
SAFETY CLIP
FEMALE FITTING
GROOVE
