TM 10-1670-272-23&P                                                         0006 00 0006 00-2 NOTE Parachutes that are deemed unserviceable, by a packing or rigging activity, will be rigger-rolled in accordance with WP 0042 (Accordion Folding/Rigger Rolling) prior to being sent to a repair activity. Table 1.  Preventive Maintenance Checks and Services (PMCS) B – Before D – During A - After INTERVAL ITEM NO. B D A ITEM TO BE INSPECTED PROCEDURES 00 MC1-1B/ MC1-1E Assembly Verify that assembly is complete, and no components are missing.  Check for proper assembly, foreign material, mildew or stains, and log record book. 01 Canopy Canopy Assembly Fabric.  Inspect for rips, burns, holes, tears, dampness, debris, frays, broken or loose stitching, and marred and illegible marks. Bridle Loop.  Inspect for cuts, breaks, frays, burns, improper installation, and loose or broken stitching. Apex Line.  Inspect for burns, cuts, thin cords, breaks, and loose or broken stitching on lateral band or radial seam. Upper Lateral Band.  Inspect the upper lateral band for holes, cuts, frays, tears, burns, and loose or broken stitching. Gore Sections.  Inspect the gore sections for dampness, dirt, foreign material, holes, cuts, snags, tears, frays, burns, loose or broken stitching, and marred or illegible markings. Informational Data Block.  Inspect for illegibility of data.