Figure 2-4. Log Record Entrees for the Modification Work Order Compliance Record Page

Figure 2-3. Inside Back Cover of Parachute Log Record - TM-10-1670-276-23P_17

Figure 2-6. Data Entries for a Log Record Note Page - TM-10-1670-276-23P_19

TM-10-1670-276-23P Parachute Cargo Type: 26-Foot Diameter High-Velocity Cargo Parachute NSN 1670-00-872-8109 Manual
Page Navigation
12

ARMY TM 10-1670-276-23&P AIR FORCE T.O. 13C5-29-2 NAVY NAVAIR 13-1-29 (a) MWO number. Enter the publication number and date of the Modification Work Order (MWO) which describes the MWO (1, figure 2-4). (b) MWO title. Enter a short, abbreviated title extracted from the MWO prescribing the work. (c) Modified by. Enter the last name of the Individual who has performed the modification. If the original log record for the parachute has been lost, and It has been ascertained through inspection that a particular modification has been accomplished, the entry for this column will be C/W "Compiled With" (2, figure 2-4), which signifies the applicable MWO has been compiled with. (d) Inspected by. The Individual who accomplished the inspection required after modification will sign this entry with last name only. Figure 2-4. Log Record Entrees for the Modification Work Order Compliance Record Page. (e) Unit. Enter the unit designation responsible for performing the MWO or in the event of a lost Log Record, the unit to which the inspector Is assigned. (f) Date. Enter the date (day, month. and year) the modification work was completed. (4) Unit and intermediate repair and inspection data When a parachute canopy assembly Is initially received from a supply source and a technical/rigger-type inspection is performed, the inspection accomplishment will be documented on the "Unit and Intermediate Repair and Inspection Data" page of the individual Parachute Log Record (figure 2-5) Additional entries will also be made on this page each time the canopy assembly Is repaired or Is administered an Inspection in compliance with a one-time Inspection Technical Bulletin (TB). The page completion criteria is as follows: (a) Type of repair. Enter the type of repair, completion of Initial inspection, repair accomplishment, Technical Bulletin Inspection compliance. (b Inspection by. The individual who accomplished the inspection required will sign this entry with last name. (c) Unit. Enter the unit designation responsible for performing the type of repair. (d) Date. Enter the day, month and year the repair was performed. 2-6

Privacy Statement
Press Release
Contact