TM 10-1670-280-23&P 0012 00
0012 00-10
e. Slowly trace these suspension risers toward the attaching loop end of the suspension risers.
f.
The three suspension risers should be on top of each riser group.
NOTE
Dress the vent reinforcement (upper lateral band) to center the
canopy vent lines.
3. Attaching the center line.
a. Position a large pedestal fan about 10-feet below and 6-feet to the left of the canopy skirt. Adjust the
fan so the canopy will be partially inflated.
b. Walk up through the inside of the canopy and pull the center line to the canopy vent.
c. Pass the center line to another packer on the outside of the canopy.
d. Secure the center line temporarily to the bridle loop with a length of ¼-inch wide cotton webbing.
e. Attach the bridle loop to the stationary post.
f.
Place the free end of the center line between lines 60 and 61 at the canopy skirt.
Riser 1
Riser 5
Riser 9
