TM 10-1670-287-23&P
0033 00
0033 00-3
6. Remove static line from shackle.
7. Pull main canopy release ripcord. This allows the two rings on the risers to disengage from base ring
and complete removal of risers.
8. Test replacement risers in accordance with WP 0011 00.
9. Compare replacement risers, ensuring there is not more than 1/2-inch difference in length.
10. Route main canopy release cables through appropriate housings. Mate hook fastener on main
canopy release ripcord to pile fastener on main ripcord pocket.
Main Canopy
Release Cables
