TM 10-1670-287-23&P
0032 00
UNIT MAINTENANCE
MC-4 RAM AIR FREE-FALL PERSONNEL PARACHUTE SYSTEM
CONNECTOR LINKS MAIN AND RESERVE CANOPY
0032 00-1
THIS TASK COVERS:
Replace
INITIAL SETUP:
Tools
Needle, Tacking (Item 29, WP 0063 00)
Shears (Item 39, WP 0063 00)
Wrench, 7/16-IN., Open End (Item 45, WP 0063 00)
Materials/Parts
Link, Connector (Item 7, WP 0069 00)
Tape, Lacing and Tying (Item 33, WP 0076 00)
Equipment Condition
Lay out on packing table or other
suitable area.
Personnel Required
92R (10) Parachute Rigger
Follow-Up Procedure
Initial receipt (WPs 0005 00 and
0006 00)
REPLACE
1. Cut and remove tacking from risers.
2. Using a 7/16-inch open-end wrench, loosen barrel nuts on connector links and remove risers.
3. Remove suspension lines from connector links and discard unserviceable links.
Connector Link
Barrel Nut
Riser
Tacking
