TM 10-1670-287-23&P
0002 00
0002 00-9
b. Harness. The harness is constructed of Type VII nylon webbing, and is an integral part of the
container. The harness includes eight adjustment points: two (2) leg connector snaps and six (6)
adjusting adapters. Four (4) accessory attachment rings, one (1) each on the upper and lower lift
webs, are used to accommodate rucksacks, containers, and weapons. The reserve canopy
attaches to the reserve risers. The risers feature control line guide rings and covers for the
control lines. The right and left lift webs serve as attachment locations for the main and reserve
ripcord pockets. Also located on the lift webs are the base rings of the three-ring release
assembly. These rings are used for attachment/release of the main parachute.
Chest Strap
Leg Strap
Equipment
D-Ring
Reserve Ripcord
Cable Housing
Waistband
Reserve
Ripcord Pocket
Base Ring of Three-Ring
Release Assembly
Static Line Guide Ring
Reserve Risers
Main Canopy Release
Ripcord Cable Housing
Main Canopy Release
Ripcord Pocket
Main Ripcord
Cable Housing
Main Ripcord
Pocket
Waistband
