TM 10-1670-287-23&P
0042 00
0042 00-3/(4 Blank)
Tacking
Long
Housing
5 ¼-IN.
10. Position replacement short housing and opposite end of long housing in keeper next to main ripcord
pocket. Tack housings in place from rear of keeper. Use tape, lacing and tying, doubled. Make one
turn around short housing, three turns around both housings, then one turn around long housing.
Secure with surgeon’s knot and locking knot. Trim free ends ¾-inch from knot.
END OF WORK PACKAGE
Tacking
Keeper
Short
Housing
Keeper
