TM 10-1670-292-23&P                                                       0018 00 UNIT MAINTENANCE MC1-1C/MC1-1D TROOP BACK PARACHUTE ASSEMBLY   GORE SECTIONS 0018 00-1/(2 Blank) THIS TASK COVERS: = Repair INITIAL SETUP: Tools Knife (Item 13, WP 0042 00) Needle, Basting (Item 18, WP 0042 00) Sewing Machine, Light-Duty (Table 1, WP 0012 00) Sewing Machine, Medium-Duty (Table 1, WP 0012 00) Sewing Machine, Darning, Lt.-Duty (Table 1, WP   0012 00) Shears (Item 28, WP 0042 00) Materials/Parts Brush, Stenciling (Item 4, WP 0055 00) Cloth, Parachute Mending (Item 11, WP 0055 00) Cloth, Parachute, Nylon, Type 1 (Item 12/13, WP   0055 00) Thread, Cotton (Item 48, WP 0055 00) Thread, Nylon, Size A (Item 51, WP 0055 00) Thread, Nylon, Size E (Item 49/52, WP 0055 00) Stencil Board, Oiled (Item 35, WP 0055 00) Personnel Required 92R(10) Parachute Rigger Equipment Condition Parachute canopy laid out on table. References Group No. 01, MAC (WP 0045 00) WP 0012 00 and WP 0014 00 Table 2, WP 0012 00 REPAIR Repair gore sections by restitching, darning, patching, or restencilling, in accordance with WP 0012 00 and WP 0014 00.  Darn holes that do not exceed ½-inch in length or diameter.  Darning is limited to two holes per gore section.  Stitching and darning will be done as specified in Table 2., WP 0012 00. END OF WORK PACKAGE