TM 10-1670-292-23&P                                                          0006 00 0006 00-3 Table 1.  Preventive Maintenance Checks and Services (PMCS) - Continued B – Before D – During A - After INTERVAL ITEM NO. B D A ITEM TO BE INSPECTED PROCEDURES 01 * * Canopy - Continued Pocket Bands.  Inspect for cuts, frays, tears, burns, and loose or broken stitching. Lower Lateral Bands.  Inspect for loose or broken stitching, rips, snags, and burns. Anti-Inversion Net.  Check for cuts, broken cords, and loose or broken stitching. Lines.  Inspect for loose or broken stitching, broken lines, broken core cords, frays, burns, and tears. Connector Links.  Inspect for rust, burrs, rough spots, corrosion, cracks, foreign material, loose or missing screws, stripped threads, and ends not locked. Control Lines.  Inspect for loose or broken stitching, broken case cords, frays, burns, tears, or broken lines. Control Line Reefing Ring.  Inspect for burrs, rust, rough spots, corrosion, cracks and bends. Control Line Bridles.  Inspect for loose or broken stitching, broken case cords, frays, burns, tears, and broken lines. Toggle.  Inspect for rough spots and cracks. Control Line Guide Ring.  Inspect for rust, burrs, rough spots, corrosion, cracks, and bends. Guide Ring Retaining Strap.  Inspect for loose or broken stitching, frays, tears, and cuts. 02 * * Risers Risers.  Inspect for loose or broken stitching and tacking, burns, frays, tears, deterioration, and marred (or illegible) markings.   Canopy Release Male Fittings.  Inspect for corrosion, rough spots, bends, and cracks.