TM 10-1670-292-23&P                                                          0006 00 0006 00-4 Table 1.  Preventive Maintenance Checks and Services (PMCS) - Continued B – Before D – During A - After INTERVAL ITEM NO. B D A ITEM TO BE INSPECTED PROCEDURES 02 * * Risers - Continued Log Record Pocket.  Inspect for loose or broken stitching Identification Tape.  Inspect for loose or missing blue pressure sensitive adhesive tape. 03 * * Harness All Webbings, Bindings, and Cloth Duck. Inspect for loose or broken stitching, burns, frays, tears, and marred or illegible markings. All Hardware & Functional Fittings.  Inspect for improper operation, rust, corrosion, burrs, & cracks. Retainer Webbings.  Inspect for loose or broken stitching, loss of elasticity, cuts and frays. Canopy Release and Ejector Snap Pads.  Inspect for loose or broken stitching and hand tacking, cuts, and tears. Horizontal Back-strap: 96-Inch and 120-Inch.   Inspect for loose or broken stitching, burns, frays, tears, and marred (or illegible) markings.   04 * * Pack Tray Pack Tray.  Inspect for illegible markings.  Inspect webbings, bindings, and duck cloth for loose or broken stitching and tacking, holes, tears, burns, and frays. Back-strap Retainers & Keepers.  Inspect for loose or broken stitches, tears, burns or frays, and missing (or damaged) snap fasteners. Pack Closing Loop. Inspect for loose or broken stitches, burns, frays and tears. Retainer Band Keepers.  Inspect for loose or broken stitches, burns, frays and tears. Static Line Slack Retainer.  Inspect for loose or broken stitches, burns, frays, tears and elasticity. Waistband & Waistband Extension.  Inspect for loose or broken stitches, burns, frays and tears; and check metal adjuster for rust, burrs or corrosion.