TM 10-1670-293-23&P
0022 00
0022 00-5/(6 Blank)
NOTE
If there is insufficient horizontal cord, on the inside of the suspension
lines of the section being replaced, to attach the replacement net,
then the horizontal net cords may be placed across the suspension
line and sewn to the other cords on each side of the suspension line.
Sew a minimum of 1-inch by skipping over the suspension line, or
sewing the cords together for 2-inches in the adjacent section, and
the section being replaced.
4. Cut out a new section so the ends may be sewn together, using the method shown in C and D, below,
as a guide. Use a light duty zig-zag sewing machine, 5-8 stitches per inch, 1/8-inch wide throw to sew
the ends together. Use a medium zig-zag sewing machine, 5-8 stitches per inch, 1/8-inch wide throw to
sew the net to the suspension line.
END OF WORK PACKAGE
