TM 10-1670-296-20&P                                                    0006 00 0006 00-5 Table 2.  Preventive Maintenance Checks and Services - continued B – Before D – During A – After INTERVAL ITEM NO. B D A ITEM TO BE CHECKED   OR SERVICED EQUIPMENT NOT READY/ AVAILABLE IF: 7 EFTC Cable Assembly.  Inspect cable for bends or kinks.  Check that cable moves freely within its cover.   Ensure that cable’s cover is not broken, that the terminals operate properly, and that the threads are not stripped or damaged.  Ensure the adjusting collar set screws are tight.  Inspect yokes for rough areas, bends, or cracks.  Ensure that shank pins and cotter pins are present. Cable has bends or kinks.   Cable does not move freely within its cover.   Cable’s cover is broken or damaged.  Terminals do not operate properly or threads are stripped or damaged.  Adjusting collar set screws are loose.   Yokes have rough areas, bends, or cracks.  Shank pins or cotter pins are missing. 8 EFTC Actuator Assembly.  Check assembly operation.  Inspect for excessive wear, bends, breaks, or weld separation.  Ensure that threads are not stripped or damaged.  Check that safety pin and cam arm spring are present.  Ensure that actuator arm is not bent, the axle nut is not loose, and there is not excessive play between arm and axle. Assembly is inoperable or has excessive wear, bends, breaks, or weld separation.  Threads are stripped or damaged.   Safety pin or cam arm spring is missing.  Actuator arm is bent, the axle nut is loose, or there is excessive play between arm and axle.