3-5. Battery Charging, Procedure. The AGU and T/C battery chargers are used
to charge the batteries in their respective units. The chargers are equipped with,
and incorporate, automatic circuits to switch them from the "fast charge" mode to the
"float" mode.
a.
Charging T/C Batteries. (See Figure 3-2.) Charge the T/C batteries as
follows:
(1)
Insert the battery pack (1) into the charger (2).
(2)
Set the voltage selector to 115 or 230, depending upon available line
voltage.
(3)
Plug the power cord (3) into electrical outlet.
(4)
Set the charger ON/OFF switch (4) to ON.
(5)
Charge the batteries for at least 6-R hours. Overcharging is
prevented automatically by the charger circuit.
(6)
When battery charging is complete, remove the battery from the
charger.
3-10
