3-5. Battery Charging Procedure - Continued
b.
Charging AGU Batteries. (See Figure 3-3.) Charge the AGU batteries as
follows:
(1)
Unscrew the charger receptacle cover on the side of the AGU.
(2)
Insert the charger plug (1) of the AGU Battery Charger (2) into the
AGU receptacle, making sure the keyed positions of the plug are
aligned properly.
(3)
Set the voltage selector to 115 or 230, depending upon available line
voltage.
(4)
Plug the power cord (3) into electrical outlet.
(5)
Set the charger ON/OFF switch (4) to ON.
(6)
Charge the batteries for at least 6-8 hours. Overcharging is
protected automatically by the charger circuit.
(7)
When battery charging is complete, remove the battery from the
charger.
3-12
