TM 10-1670-327-23&P
0016 00
6. Ensure pull up cords (figure 35, item 1) are aligned with closing flap grommets (figure 35, item 2)
positioned on each side of the pack tray.
7. Make 1 fold (figure 35, item 3) over the ejector spring. The right side of the fold should extend past
the other folds approximately 6 inches.
8. Fold under 4 inches under the top fold to form a bridge over the top of the ejector spring.
Figure 35. Forming a Bridge Over Top of Ejector Spring.
0016 00-26
