TM 10-1670-327-23&P
0052 00
REPLACE continued
4. Carefully remove the stitching (box stitch pattern) that attaches the tuck tab and snap fastener (figure
3, item 1) to the LEFT upper main lift web (figure 3, item 2) Remove the main lift web from the lower
harness adjustment buckle (figure 3, item 3). Replace with a new LEFT upper main lift web
assembly.
1
1
2
3
Figure 3. Replacing Harness Left Upper Main Lift Web (continued).
5. Attaching the LEFT upper man lift web to the harness assembly
6. First ensure that the LEFT upper main lift web (figure 4, item 1) is correctly positioned so that the
canopy release assembly is facing down and the equipment d-ring is located toward the lower saddle
assembly.
7. Route the LEFT upper main lift (figure 4, item 1) then route the main lift web strap through the lower
adjustment buckle (figure 4, item 2) thread the strap through the lower adjustment buckle (figure 4,
item 3) from bottom to top then back up through the lower adjustment buckle.
8. Ensure you pull enough excess webbing through the lower adjustment buckle (figure 4, item 4) to
allow for sewing the tuck tab and snap fastener onto the LEFT main lift web strap.
0052 00-3
