TM 10-1670-327-23&P
0053 00
REPLACE - continued
4. Layout the harness assembly (figure 3, item 1) ensuring that the data tag on the horizontal back
strap (figure 3, item 2) is facing up, in this layout configuration the hip pads and leg ejector snaps will
be facing up, the shoulder pad on the RIGHT upper main lift web will be positioned so that the canopy
release assembly is facing up.
1
1
2
3
Figure 3. Replacing Harness Right Upper Main Lift Web (continued).
5. Attaching the RIGHT upper man lift web (figure 4, item 1) to the harness assembly
6. First ensure that the RIGHT upper main lift web (figure 4, item 1) is correctly positioned so that the
canopy release assembly (figure 4, item 2) is facing up and the equipment d-ring (figure 4, item 3)
is located toward the lower saddle assembly (figure 4, item 3).
7. Route the RIGHT upper main lift web strap (figure 4, item 1) through the lower adjustment buckle
(figure 4, item 2) thread the strap through the lower adjustment buckle (figure 4, item 2) from top to
bottom then back up through the lower adjustment buckle.
8. Ensure you pull enough excess webbing through the lower adjustment buckle (figure 4, item 2) to
allow for sewing the tuck tab and snap fastener onto the RIGHT main lift web strap.
0053 00-3
