MWO 10-1670-293-20-2
c. Maintenance Instructions
The various Maintenance Levels are as follows:
(1) "C"--Operator or crew maintenance
(2) "O"--Unit maintenance
Table 5. Maintenance Allocation Chart for Harness Assembly
Components/Assembly
Maintenance
Maintenance Level
Tools/Equipment
Function
"C"-
"O"-Organization
Operator
Harness, Assembly
Repair
0.5
See Section 9 in
this MWO
Replace
0.4
See Section 9 in
this MWO
Maintenance Level Column
The work time figure represents the average time required to restore an item (assembly,
subassembly or component) to a serviceable condition under typical field operating conditions.
Tools/Equipment Column
See Section 9, Special Tools, Tool Kits, Jigs, Test, Measurement And Diagnostic Equipment
(TMDE), and Fixtures Required, in this MWO.
11. CALIBRATION REQUIRED. N/A.
12. WEIGHT AND BALANCE DATA. N/A.
13. QUALITY ASSURANCE REQUIREMENTS. Qualified personnel will accomplish inspection of
the completed MWO application for full compliance with the technical requirements of the
instructions.
14. RECORDING AND REPORTING OF THE MODIFICATION RECORDS AND REPORT
FORMS.
a. Records and reports. The organization responsible for MWO application will report
application information as follows:
MWO application information can be input directly into the Modification Management
Information System (MMIS) over the Internet. Entry into the MMIS system is password protected.
New users can register on-line at https//www.mmis.army.mil. Passwords are normally approved
and issued within 48 hours.
9
