MWO 10-1670-293-20-2
(2) Repeat steps 10 a. through b. for the opposite side.
(3) Record completed MWO on DA Form 3912, Army Parachute Log Record Book.
Installation of D-rings (Option 2).
(1) Inspect D-ring in accordance with 10a. (1) above.
(2) Locate the existing D-rings on the main lift web of the parachute harness (either left or right).
Position the D-ring in such a way as to expose the web bar leg and secure in a vise or other
securing device (Figure 6).
Web Bar
FIGURE 6
(3) Cut off the existing D-ring. Cut the web bar in such a way that allows you to remove the web
bar from within the harness material. Exercise extreme caution while cutting the web bar so as to
avoid cutting the harness material (Figure 7).
FIGURE 7
6
