TM 10-1670-268-20&P 0004 00
TYPE V AND DUAL ROW AIRDROP PLATFORM
ASSEMBLING THE TYPE V AND DUAL ROW AIRDROP PLATFORM
0004 00-1
THIS TASK COVERS:
Assembly
Disassembly
INITIAL SETUP:
Tools
Bar, Pry, Crow or Wrecking (Item 1, WP 0020 00)
Cord, Extension (Item 3, WP 0020 00)
File, Mill (Item 7/8, WP 0020 00)
File, Round (Item 9, WP 0020 00)
Hammer, Ball Peen (Item 10, WP 0020 00)
Handle, File (Item 11, WP 0020 00)
Knife, Rigger (Item 13, WP 0020 00)
Punch, Aligning (Item 15, WP 0020 00)
Socket, ¾ -IN. (Item 17, WP 0020 00)
Socket, 9/16-IN. (Item 19, WP 0020 00)
Tape, Measuring (Item 20, WP 0020 00)
Wrench, Box and Open, ¾ - IN. (Item 23, WP 0020 00)
Wrench, Box and Open, 11/16 - IN. (Item 25, WP 0020 00)
Wrench, Box and Open, 15/16-IN. (Item 26, WP 0020 00)
Wrench, Box and Open, 5/8-IN. (Item 27, WP 0020 00)
Wrench, Box and Open, 9/16-IN. (Item 28, WP 0020 00)
Wrench, Impact, Pneumatic ½ -IN. (Item 30, WP 0020 00)
Personnel Required
Two, 92R (10) Parachute Rigger
Material/Parts
Tape, Adhesive, 2-IN. (Item 6, WP 0036 00)
Thread, Cotton, 8/7 (Item 7, WP 0036 00)
Webbing, Tiedown, CGU-1B (Item 8,
WP 0036 00)
Additional Equipment
Forklift
3-foot Suspension Sling
ASSEMBLY
Assembling the major components. The basic assembly of the type V and dual row airdrop platform is
achieved by systematically bolting the major components together. The major components of the type V
airdrop platform consist of main panel assemblies, a rear panel assembly, roller pads and side rails. The
major components of the dual row airdrop platform consist of panel assemblies, roller pads and side rails.
NOTE
Inspect all components for damage or wear. Burrs and sharp edges
should be removed with a file. Damaged or bent parts should be
removed and replaced.
1. Assemble the Type V Airdrop Platform as follows:
a. Position all components as near as practical to the location where the platform is to be
assembled.
b. Start the screws two or three turns by hand.
