TM 10-1670-268-20&P                                            0006 00 0006 00-8 INTERVAL ITEM TO BE CHECKED   OR SERVICED EQUIPMENT NOT READY/ AVAILABLE IF: ITEM NO. B D A 8 Main Panel Assembly, Type V.  Inspect for bent, burred or corroded tie down rings.  Make certain the panel is not bowed more than ¼-inch along the 101- inch line nor more than ¹/₁₆-inch along the 24-inch line.  Make certain the panel does not have punctured or torn areas larger than 6-inches in diameter.  Check for damaged or missing floating nuts.  Refer to WP 0015 00 for corrective action. Panel is bowed more than ¼-inch along the 101-inch line or more than ¹/₁₆-inch along the 24-inch line.   Panel has puncture(s) or torn area(s) larger than 6- inches in diameter. 9 Panel Assembly, Dual Row.  Inspect for bent, burred or corroded tie down rings.  Make certain the panel is not bowed more than ¹/₈-inch along the 80-inch line nor more than ¹/₁₆-inch along the 24-inch line.   Make certain the panel does not have punctured or torn areas larger than 6-inches in diameter.  Check for damaged or missing floating nuts.  Refer to WP 0015 00 for corrective action. Panel is bowed more than ¹/₈-inch inch along the 80- inch line or more than ¹/₁₆- inch along the 24-inch line.   Panel has puncture(s) or torn area(s) larger than 6- inches in diameter.