TM 10-1670-268-20&P                                            0006 00 0006 00-3 Cleaning.  Clean the platform before performing the organizational preventive checks and services, as follows: 1.    Remove debris with a dry stiff bristle brush. 2.    Remove dirt and grease with a soap solution composed of one-half cup of dishwashing detergent per gallon of water. Rinse with clean water. Wipe dry with a clean cloth. 3.    Remove rivet head corrosion with a stainless steel wire brush and apply a light coating of clear enamel. Table 1.  Preventive Maintenance Checks and Services B – Before D – During A – After INTERVAL ITEM NO. B D A ITEM TO BE CHECKED   OR SERVICED EQUIPMENT NOT READY/ AVAILABLE IF: 1 Clevis Assembly.  Bends, Cracks, Burrs, corrosion, foreign material, grease, dirt, defective or missing bolt, stripped threads, missing spacers, missing nuts. Refer to WP 0008 00 for corrective Actions. Defective clevis, bolt, spacer or nut.  Missing bolt, spacer or nut.