TM 10-1670-268-20&P 0008 00
0008 00-2
CLEAN
1. Remove dirt, grease, and foreign material, using clean, warm water or a solution of dishwashing
compound and warm water. Rinse with clean water.
2. Wipe dry with clean cloth.
3. Remove burrs by filing.
4. Remove corrosion with wire brush.
INSPECT
Inspect for wear, cracks, excessive corrosion, and deformation.
REPLACE
1. Replace parts that show any of the defects identified in INSPECTION above.
2. Replace clevis assembly (1) if clevis body (6) is unserviceable.
ASSEMBLE
1. Position spacer (5) between sides of clevis body (6).
2. Install in descending numerical order, bolt (4), washer (3), and nut (2).
END OF WORK PACKAGE
2
1
3
5
4
6
