TM 10-1670-272-23&P 0011 00
0011 00-49
a. Rotate the pack tray a quarter-turn counterclockwise. Make the first static line stow to the lower
right outer stow bar. Make the second static line stow to the lower left outer stow bar. Make the
third static line stow to the lower right inner stow bar. Make the fourth static lie stow to the lower
left inner stow bar. Make the fifth static line stow to the middle right inner stow bar. Make the
sixth static line stow to the middle left inner stow bar. Make the seventh static line stow to the
upper right inner stow bar. Make the eighth static line stow to the upper left inner stow bar.
b. Secure the snap hook to the upper right outer stow bar. Stow the remaining static line in the static
line slack-retainer. Stow the excess under the existing stows and the bottom of the pack tray
protector flap.
3. Stowing the USL 20-foot static line configuration.
NOTE
The girth hitch, attaching the 5-foot extension for the 20-foot static
line, must be centered between the ninth and tenth stows. If
necessary, adjust the previous stows. The end of each stow must
not be longer than 2-inches from the rubber band.
Static Line
Slack Retainer
