TM 10-1670-272-23&P 0011 00
0011 00-50
a. Rotate the pack tray a quarter-turn counterclockwise. Make the first static line stow to the lower
right outer stow bar. Make the second static line stow to the lower left outer stow bar. Make the
third static line stow to the lower right outer stow bar. Make the fourth static line stow to the lower
left outer stow bar. Make the fifth static line stow to the lower right inner stow bar. Make the sixth
static line stow to the lower left inner stow bar. Make the seventh static line stow to the middle
right inner stow bar. Make the eighth static line stow to the middle left inner stow bar. Make the
ninth static line stow to the upper right inner stow bar. Make the tenth static line stow to the upper
left inner stow bar.
b. Secure the snap hook to the upper right outer stow bar. Stow the remaining static line in the static
line slack-retainer. Stow the excess under the existing stows and the bottom pack tray protector
flap.
4. Rigger check number 7.
ARMY PARACHUTE LOG RECORD
Beginning with the initial packing of a parachute, and each time a parachute is repacked, the log record
must be completed, as follows:
1. Remove the log record (DA Form 3912, AFTO 391, and NAV WPNCEN or NAVN WPNS CL
13512/11) from the parachute inspection data pocket (log record pocket) located on the riser.
