TM 10-1670-272-23&P 0038 00
0038 00-2
a. Invert the canopy and center the damaged section on the worktable.
b. Smooth the area around the damaged section; ensure that the radial and diagonal seams are
straight. Place the pins through radial and diagonal seams as far above and below the damaged
sections, as necessary.
c. Remove damaged section by cutting fabric ½-inch from all seams, except at a skirt and upper or
lower lateral band where sections can be cut out flush with the lateral band.
d. Fold back raw edges of trimmed seams ½-inch and baste to the seam with ticket No. A, nylon
thread, or ticket No. 24/4 cotton thread.
