ARMY TM 10-1670-279-23&P
AIR FORCE T.O. 13C5-27-2
NAVY NAVAIR 13-1-28
2-26.
Gore Section (cont).
4
Using 3.5-ounce nylon cloth, mark and cut a patch 2 1/2 inches wider and longer than inside
measurements of prepared hole. Ensure patch material is marked and cut along warp or filling of fabric.
5
Center patch material over prepared hole and ensure warp or filling of patch material matches warp or
filling of fabric being patched. Pin patch material in position.
6
Make 1/2-inch foldunder on each edge of patch material and baste patch to prepared area. Basting will be
performed using procedures in para. 2-18a.
7
Remove pushpins securing item to the repair table and secure patch by stitching, using a light duty sewing
machine and size E nylon thread and applicable details in figure 2-38. Make first row of stitching
completely around patch. Invert canopy and make a second row of stitching around prepared hole.
Stitching will be 7 to 11 stitches per inch.
8
Replace items removed for miscellaneous patch, as required, in accordance with applicable item
procedures.
(4) Restenciling. As required, restencil identification markings using procedures in para. 2-20.
2-70
