TM 10-1670-280-23&P 0012 00
0012 00-43
d. Secure the stow tie with a surgeons knot and locking knot.
e. Rigger check number 5.
f.
Extend the running end of the suspension lines across the deployment bag to the upper left corner of
the deployment bag.
g. Measuring to the left edge of the stowage compartment, form the second suspension line stow by
making a loop in the lines.
h. Secure the second suspension line stow to the upper left outside strap loop using the first stow tie.
i.
Secure the stow tie with a surgeons knot and locking knot.
j.
Using the procedures in (a) through (i) above, stow the remaining lengths of suspension lines, center
lines and the suspension risers to a point 6 to 10-inches from the clevis attaching loops on the end of
the suspension risers.
k. Install an additional stow tie on the center strap loop in order to route the suspension risers and
center line from the center of the bag.
l.
Trim all ties to 2-inches.
m. Remove unused ties.