ARMY TM 10-1670-281-23&P
AIR FORCE T.O. 13C5-32-2
NAVY NAVAIR 13-1-32
c. Adjustment. Modifying deployment bag for G-12E
(1)
Enlarge each locking stow loop by cutting 3/4 to 1 1/2 inches of stitching on one end of the loop
with your rigger's knife (figure 2-133.1).
(2)
Insure that the stitching is cut only on one end, and that the length of cut stitching does not
exceed 1 1/2 inches.
(3)
Stencil “D-BAG FOR G-12E ONLY” on the riser extension protector flap, 3 inches from the
edge of open end. Stencil 1 -inch letters with a stencil brush, ink and a stencil marking set
(figure 2-133.2).
Figure 2-133.1. Enlarging Locking Stow Loops, G-12E Deployment Bag .
Change 3
2-180.1
