TM 10-1670-287-23&P 0008 00 0008 00-3/(4 Blank) Table 1.  Preventive Maintenance Checks and Services (CONT) X – Before and after all repairs, and before packing (technical/rigger type inspection). Y – After use (shakeout). Z – Prior to issue (routine inspection). INTERVAL ITEM NO. X Y Z ITEM TO BE INSPECTED PROCEDURE 09 Pilot parachute fabric materials Check for dampness, fungus, acid, grease, oil, dirt, foreign material, rips, burns, cuts, frays, tears, holes, thin spots, and loose or broken stitching. 10 Pilot parachute hardware Check for cracks, rust, distorted or broken springs. 11 ^{Harness/container} assembly Check for dampness, fungus, acid, grease, oil, dirt, cuts, and broken webbing. 12 Harness fabric material Check for dampness, fungus, acid, grease, oil, dirt, cuts, broken webbing, and loose or broken stitching. 13 Hardness hardware Check for corrosion, cracks, rust, rough spots, burrs, and distortion. 14 Container assembly Check for dampness, fungus, acid, oil, grease, dirt, foreign material, holes, and tears. 15 Container fabric materials Check for dampness, fungus, acid, oil, grease, dirt, foreign material, cuts, tears, and holes. 16 Container hardware Check for corrosion, cracks, rust, rough spots, burrs, loose or missing grommets or snap fasteners. 17 Deployment bags Check for dampness, fungus, acid, grease, oil, dirt, foreign material, cuts, holes, tears, broken or loose stitching, loose or missing grommets, and burrs/rough spots on grommets. 18 Ripcords Check for corrosion, cracks, rust, bends, fraying, broken strands, and security of swaged terminal balls and ripcord pins. LUBRICATION SERVICE INTERVALS   MC-4 Ram Air Personnel Parachute System does not require lubrication service. END OF WORK PACKAGE