TM 10-1670-287-23&P 0005 00
0005 00-10
INSTALLATION OF SAFETY STOW; ELASTIC LOOP IN DEPLOYMENT BAG
Install safety stow elastic loop in deployment bag as follows:
CAUTION
Do not tack elastic loop to deployment bag. Safety stow elastic loop
must move freely within guide channel.
1. Insert elastic loop in channel. Center loop splice between grommets.
2. Route each loop end through appropriate grommet.
ATTACHMENT OF CONTROL LINES TO CONTROL TOGGLES
Attach control lines to control toggles as follows:
1. Pass control line through guide ring on rear riser, and the through ring on control toggle.
Control Line
Tacking
Guide Ring
Ring
Toggle
Safety Stow
Loops
Rear Riser
