TM 10-1670-287-23&P 0005 00
0005 00-11
2. Temporarily secure control line to ring with a loose overhand knot against toggle ring.
NOTE
Final adjustment will be made during the full-flight trim check (WP
0005 00).
3. Perform canopy trim check as follows:
a. Using the equipment D-rings, attach the container to a stationary point, ensuring equal tension,
with the harness down and container facing up.
b. Obtain suspension line group separation and place canopy with the nose down and the tail facing
up.
Control Line
Overhand Knot
Rear Riser
Ring
Toggle
