TM 10-1670-293-23&P
0011 00
0011 00-29
Change 1
WARNING
Inspect the deployment bag and the entire static line, including that
portion under the sleeve. Failure to do so may cause serious injury
or death to personnel.
1. Pull the bottom of the deployment bag up through the opening of the deployment bag until the static
line buffer loop and the deployment bag reinforcement webbing is visible.
2. To secure the static line while stowing the canopy, S-fold the static line and roll the suspension line
protector flap around the folded line. Secure the ends of the protector flap with rubber retainer bands.
3. For the USL, double a 36-inch length of Type I, ¼-inch cotton webbing. Pass one end of the doubled
webbing through both plies of the static line buffer loop, through the bridle loop of the canopy, and
back through both plies of the static line buffer loop.
4. For the standard static line, double a 36-inch length of Type I, ¼-inch, cotton webbing. Pass one end
of the doubled webbing through the static line buffer loop, through the bridle loop of the canopy, and
back through the static line buffer loop.
