TM 10-1670-293-23&P
0003 00
0003 00-4
5. Complete the attachment tie by making a half hitch on top of the slip loop made in step 2., above.
6. Thread one running end of the log record attachment tie in a tacking needle and pass the tacking
needle, with attached end, through the edge binding of the applicable parachute log record/
inspection data pocket.
7. Remove the lacing end from the tacking needle; make a finished 10-inch-long log record attaching
loop by securing the two lacing ends together with an overhand knot.
8. Insert the log record into the pocket and secure the record within the pocket using the pocket flap
and applicable type flap fastener.
Accomplishing a Log Record. Upon completion of the first technical/ rigger-type inspection, the
individual performing the inspection will initially prepare a log record for an individual parachute, or
applicable type parachute harness, and accomplish subsequent record entries using the following
procedures:
NOTE
Log record book entries will be made with a suitable type blue or
black ink pen that cannot be erased (no felt tip markers).
