TM 10-1670-296-20&P 0005 00
0005 00-2
Table 1. Preventive Maintenance Checks and Services - continued
B Before
D During
A After
INTERVAL
ITEM NO.
B
D
A
ITEM TO BE CHECKED
OR SERVICED
EQUIPMENT NOT READY/
AVAILABLE IF:
2
Extraction Force Transfer
Coupling. Ensure that all parts
are present and securely
fastened together. Check for a
bent Spring Guide Rod, check
for free movement of actuator
arm latching pin, ensure the
three (3) self locking nuts on 3-
point link assembly are tight,
check for a misaligned dot and
arrow, ensure cam of 3-point
link and latch are properly
seated, check EFTC for positive
lock and operation. Inspect
extraction force transfer
coupling (1) for presence of
foreign matter. Refer to WP
0013 00.
Extraction force transfer
coupling (1) is not complete,
spring guide rod shows
bending or a curvature
against a straight edge, latch
pin is bent, sticks in one
position, binds, is dirty, or
debris is found in the latch
pin assembly inside
actuator, threads of bolts do
not protrude from self
locking nuts by two (2)
threads or are at least flush
with the three self locking
nuts, dot and arrow are not
aligned within a 1/16-inch but
lock link is fully seated into
catch slot, extraction force
has foreign matter present.
1