TM 10-1670-299-20&P
TO 14D1-2-470-2
NAVAIR 13-1-41
(7) Bridle Assembly. To replace this assembly proceed as follows:
a Cut the damaged bridle assembly (1), from the triangle link (2) holding it to the horizontal restraint
assembly (3). If link (2) is to be replaced, cut the stitching (4) holding the link chape (5) to the horizontal (3) and vertical
restraint assemblies (6).
b Remove rapid connector link (7) from bridle assembly (1).
c Fabricate new bridle assembly (1) as described in Appendix E.
c Attach new bridle assembly (1) by threading triangular link (2) to chape and restitching chape with a
box x stitch to the vertical restraint assembly using size FF thread, 7 to 9 stitches per inch and a type MD sewing
machine. Connect the rapid connector link (7) to the other trianguler link.
2-162
