TM 10-1670-299-20&P
TO 14D1-2-470-2
NAVAIR 13-1-41
Table 2-2. Unit Troubleshooting Procedure
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
1. EXTENSION SNAP HOOK DOES NOT FUNCTION OR SAFETY PIN CANNOT BE INSERTED.
Step 1.
Check snap hook for damage/deformation.
Replace snap hook if damaged/deformed.
Step 2.
Check safety pin for damage/deformation.
Replace safety pin if damaged/deformed.
2. SCUBA SET STRAPS OR SHIELD CANNOT BE INSTALLED PROPERLY.
Step 1.
Check waistband strap, harness backstrap, and support strap hardware far proper function.
Replace hardware if malfunctioning.
Step 2.
Check shield for bends or other deformation.
Replace entire shield if damaged/deformed.
3. LOWERING LINE OR ATTACHING WEB DOES NOT ATTACH PROPERLY
Step 1.
Check snap hook for damage/deformation.
Replace snap hook if damaged/deformed.
4. DRAGON PACK HARDWARE DOES NOT FUNCTION PROPERLY.
Step 1.
Check all hardware items for damaged/deformation.
Replace hardware if damaged/deformed.
5. HARNESS RELEASE LANYARD DOES NOT FUNCTION PROPERLY.
Step 1.
Check release handle for proper attachment of wire rope.
Repair release handle if necessary
Step 2.
Check all hardware items for damaged/deformation.
Replace hardware if damaged/deformed.
2-30
